Small Convertible Reflector 17” x 17.5” x 7”
Control Wizard Products has manufactured the first truly convertible lamp reflector in a small size. It can run multiple air outlets and/or lamps and can be configured to meet your needs. Comes with 1 socket plate, 2 louvered plates, and 3 blockout plates. No Socket Assembly included. The Convertible Reflector dimensions are 17” x 17.5” x 7”. Optional/Additional adapters include: 4" air adapter(RE503), socket plate(RE505), louvered plate (RE506) and blockout plate (RE507). Sold Separately. Shown in this section. Control Wizard Products has manufactured the first truly convertible lamp reflector. Control Wizard Product’s lightweight Small Convertible Reflector™ will not burn out light movers like heavy steel reflectors do. Lightweight high quality painted aluminum is used to help insure that all brands and models of light movers will give years of faithful service. The Small Convertible Reflector™ dimensions are 17” x 17.5” x 7”. The Small Convertible Reflector™ can be air cooled with 4” air ducting by simply removing the appropriate end plates and installing the selected air duct adapters. One or two air ducts may be run through the reflector at any one time. There is no right or wrong way to use the air ducting adapters or position lamps. The reflector has been designed to work for all applications. Use your imagination. The basic reflector does not include ducting adapters. Once you determine your needs you may order ducting adapters. Ten bends in the reflector insure the grower that any brand of HID lamp will throw an even light pattern over the plants. Multiple lamps may be used in several different configurations. Purchase an extra lamp socket plate and horizontal socket assembly when adding another lamp. No screwdrivers are required to position air ducting adapters, louvered plates, socket assembly plates or block-out plates. Glass is not included unless it is ordered. The Tempered Glass Shield is needed for air-cooling or to reduce UV rays to cuttings. Also, the Tempered Glass Shield is highly recommended as it will protect the consumer from burns caused by accidentally coming in contact with the hot lamp or spraying water on a hot lamp causing it to implode. A screwdriver is needed to remove or replace the glass retainer lock. High wattage compact fluorescent mogul base lamps may be used if a 120 volt socket assembly and power cord is purchased for each lamp. Control Wizard Products recommends Sunmaster brand lamps for the best growing results.
Sign In
